The Erickson Ratchet Tie-Down Strap with Web Clamp and Snap Hooks, part # EM58501 that you referenced, is suitable for your application to secure a vehicle to your flat car hauler trailer by its tow hooks, but we also offer shorter straps like their 7-foot Car Tie Down # 58503 which also has hooks on both ends. To use either of these you'll need tie-down hooks on the deck of the trailer. If you need D-Ring tie downs you can use # LRB1 from Brophy.
If you prefer you can use 4 axle straps... view full answer...
Yes, if you used 4 of the ShockStrap Cam Buckle Tie-Down Strap w Shock Absorber # 297-6CSRP-2 you could secure your 3,000 lb race car well. Each of these have a 1,500 lb break strength rating. view full answer...
The Bulldog Winch Combo Axle/Ratcheting Vehicle Tie-Down Straps - Qty 4 # BDW20230 are a great way to secure your 2020 Chevy Blazer to your car hauler. Axle straps are superior to tire straps and are going to be more secure overall so these are definitely the way to go.
The straps use twisted snap hooks to prevent accidental detachment. They also have gold-zinc plated steel ratchets to resist corrosion. The safe working load limit of each strap is 3,335 lbs so it will be more than enough... view full answer...
Since you never know what you might need to put on your car hauler I recommend going with something that has a high capacity such as the set of 4 Bulldog axle tie down straps # BDW20230. They are rated for 3,335 pounds working load and 10,000 pound break strength. It is important though to go by the working load limit for any strap. I have included a link to a video review of these straps for you. view full answer...
For your trailer the tracks have openings that go front to back. To secure vehicle tires you would need the openings to run left to right like # E19148. Then you could use # 77314 which has e-track fittings. But we can make it work by using a couple of tie downs, # E59143, and ratchet straps such as # EM34416.
If a vehicle has smaller or larger tires you would just place the tie downs in the appropriate spots on the tracks. Vehicles that are wider or narrower may still work on the same... view full answer...
Based on my research the Tesla Model 3 has 18-20 inch diameter wheels/rims that are 8.5 inches wide and uses 235/45R18 or 235/35R20 tires. I recommend using the Bulldog Winch Ratcheting Wheel Tie-Down Strap for Extra-Wide Tire - Vertical Mount - 3,335 lbs # BDW20362 for the tires on your Tesla.
Traditional wheel straps won't fit the low profile wide tires, so this style strap is the best option for the application. view full answer...
To secure your Jeep to the metal deck of your car hauler, I recommend taking a look at the Erickson Car Tie-Down Kit # 08504-05. These straps feature twisted flat hooks that will help to keep the strap straight and flat along with axle straps to help secure the vehicle into place. They have a safe working load limit of 3,300 pounds and a maximum load of 10,000 pounds.
I recommend using these with E-Tracks like the 4 Foot # EM19147, which can be bolted to the metal deck of your trailer.... view full answer...
Sounds like you are looking for a strap to secure a vehicle by the axle on a tandem axle car hauler trailer.
A few of the part # EM34410 strapped around the axle of a vehicle and then back to a tie down anchor would work well. view full answer...
Yes, the Erickson E-Track Wheel Tie-Down Strap part # EM58523 is exactly what you are looking for as it does not come into contact with the face of the tire like the Erickson Adjustable Wheel Net with E-Track Fittings part # 77314 does. These will both hook into the Erickson Horizontal E-Tracks like part # EM19147.
I have attached a list of the different lengths tracks we offer as well as a photo. view full answer...
The Adjustable Ratcheting Wheel Net # EM58522 that you referenced would be a great choice for securing the wheels of a vehicle on your 3 car trailer. Each of these has a 10,000 lb break strength limit and a 3,333 lb working load limit.
These also can fit tires from 14 to 29 inches in diameter. view full answer...
I have a few options for you to secure your 2017 Honda Pilot to the Gatormade Flatbed Car Hauler. The best option would be to use the Erickson E-Track Tie-Down Kit part # EM58523-09162 (2) along with the Erickson Horizontal E-Track part # EM19147 (4). This will be the most secure option we have and it can be used on pretty much any vehicle under 4,400 lbs.
If you don't want to use the above then a more cost effective alternative would be to utilize the stake pocket openings welded to the... view full answer...
The correct size wheel tie-down strap for the Demco Kar Kaddy X Tow Dolly part # DM9713093 using a 245/50-20 tire is the Replacement 3-Point Large Wheel Tie-Down Strap for Demco Tow Dollies part # DM03528-93. view full answer...
I spoke with my contact at Rightline and they told me the tie-down straps are not sold as a separate item.
If you are able to locate the 1 inch strap and the cam buckle, I recommend part # RL100600. These are the Car Clips for Rightline Rooftop Cargo Bags, and would provide the attach clips for your cargo bag on the roof of your 2014 Nissan Altima. The straps are 1 inch wide that are needed.
To protect your Altima roof finish and the cargo bag I recommend using a non skid protection... view full answer...
For your 3,000 lbs roller, I recommend using the Erickson Car Tie-Down Kit - Twisted Flat Hooks and Axle Strap w/ Ratchet # 08504-05, provided you have the necessary attachment points. This kit has a working load limit (WLL) of 3,300 lbs so it would be enough for your roller. This kit comes with an axle strap, but if you needed additional axle straps for tie-downs, you could use the Erickson Axle Strap with D-Rings # 88509.
If you do not have good tie-down points, another option would... view full answer...
I like using wheel straps for securing vehicles to trailer as the wheels of a vehicle are very securely attached to it and you don't have the risk of ripping out body tie down points like you mentioned experiencing.
For that I really like the Pack'Em Wheel Tie Down Kit part # PK-WTD which you'd use for each of the tires. view full answer...
The Brophy D-Ring Tie Down Anchor # SR15-C that you referenced can attach to wood and can be used to secure a car as it has plenty of capacity at 1,600 lbs. Now whether or not it will work well attached directly to wood is not something I can really say since wood doesn't have the same capacity as metal. You'd have to consider the type and dimensions of the wood your trailer has and how many of these anchors you'd be using. view full answer...
I have the perfect product for you and your 2017 Subaru Crosstrek. I recommend the Malone Hood Loops for Thule Bow/Stern Tie-Downs - Qty 2 Item # MPG308. Close the cylinder of one under the hood and the cylinder for the other close in the rear hatch, leaving the straps out on both, and that will create 2 easy to access and use tie down points to secure the canoe. I have linked a video below showing how they work. view full answer...
The only way to get the sleeves of the part # 88509 is to order them. They aren't available as a separate part.
We do have a similar sleeve though, part # EM06305. This is used to protect painted surfaces, but it also protects the strap. view full answer...
First, thanks for the photo of the Jeep, that's a really cool vehicle you have there. And I appreciate the fact you're looking to maximize safety, as the weight limits can definitely be confusing. We can absolutely help you out here though with straps for your 3,000 lb Jeep.
What you need are straps that exceed the capacity of your cargo, which in your case is a 3,000 lb Jeep. We do have that with an option from Bulldog Winch:
- Bulldog Winch Combo Axle/Ratcheting Vehicle Tie-Down Straps... view full answer...
You will want to use tie downs to secure the bows and sterns of the kayaks when transporting them on the roof of any vehicle, including your 2014 Toyota Camry Hybrid. A lot of the kayak carriers come with tie downs but if you need some you can use # e36ZR. Finding a good spot to secure the tie downs on a vehicle can be difficult but this kit is great solution for you. It comes with soft foam anchors that close inside of your hood or hatch to secure your straps without damaging your vehicle.... view full answer...
Go To Results